Analog Output Unit (4-channel) KV-RC4DA

KV-RC4DA - Analog Output Unit (4-channel)

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Specifications

Model				KV-RC4DA
General specifications	Vibration resistance	Intermittent vibration	Frequency：5 to 9Hz	Half amplitude: 3.5 mm^*1
			Frequency：9 to 150Hz	Acceleration: 9.8 m/s²^*1
		Continuous Vibration	Frequency：5 to 9Hz	Half amplitude: 1.75 mm^*1
			Frequency：9 to 150Hz	Acceleration: 4.9 m/s²^*1
	Current consumption			240mA
	Power voltage			24 VDC ± 10%
	Operating ambient temperature			0 to +60°C (no freezing)
	Operating ambient humidity			10 to 95%RH(no condensation)
	Ambient temperature for storage			-20 to +75°C
	Approved standards	Overvoltage category		I
		Pollution degree		2
	Storage relative humidity			10 to 95%RH(no condensation)
	Approved standards	CE marking		EMI ：EN55011 Class A EMS ：EN61131-2
	Operating environment			Minimal amount of dust and corrosive gas present
	Altitude			2000m or less
	Approved standards	FCC		FCC Part15B class A
		UL		UL ：UL508 CSA ：CAN／CSA22、2 No.14
		ICES		ICES-003 Issue4
	Noise immunity			1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator), conforms to IEC standards (IEC 61131-2)
	Withstand voltage			1,500 VAC for 1 minute (between the power supply terminal and the communication terminal, between the power supply terminal and the I/O terminals, and between all the external terminals and the case)
	Enclosure rating			IP2X
	Insulation resistance			50 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminal)
	CC-Link specifications			Supported versions: 2.00, 1.10; number of occupied stations: 1 station ×2 with version 2.00, 2 stations with version 1.10; station type: remote device station
Performance specifications	Analogue output range (resolution)			Voltage: -10 to 10 V (0.83 mV, 1/24000) 0 to 10 V (0.83 mV, 1/12000) -5 to 5 V (0.42 mV, 1/24000) 0 to 5 V (0.42 mV, 1/12000) 1 to 5 V (0.42 mV, 1/9600) current: 0 to 20 mA (1.67 µA, 1/12000) 4 to 20 mA (1.67 µA, 1/9600)
	Conversion speed			-
	Conversion precision
	Isolation mode
	Number of analog outputs			4
	Minimum load resistance			Voltage: 1 kΩ
	Maximum load resistance			Current: 400 Ω
Weight				approx 200g
^*1 Conforms to JIS B 3502 IEC61131-2 Number of sweeps: 10 times respectively in the X, Y, and Z directions, 100 minutes

Data Sheet (PDF) Other Models