Sensor head LJ-X8020

LJ-X8020 - Sensor head

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model			LJ-X8020
Reference distance			20 mm
Measurement range	Z-axis (height)		±2.2 mm (F.S.=4.4 mm)
	X-axis (width)	NEAR side	7 mm
		Reference distance	7.5 mm
		FAR side	8 mm
Light source			Blue semiconductor laser
Light source	Wavelength		405 nm (visible light)
	Laser class		Class 2M laser product (IEC60825-1, FDA (CDRH) Part 1040.10^1)^2
	Output		10 mW
Spot size			Approx. 16 mm × 32 µm (reference distance)
Repeatability	Z-axis (height)		0.3 µm^3^4
	X-axis (width)		0.3 µm^3^5
Linearity	Z-axis (height)		±0.05% of F.S. (±0.012%)^*6
Profile data interval	X-axis (width)		2.5 µm (2 µm~)^7^8
Profile data count			3200 points
HDR (high dynamic range)			Single-shot HDR^*9
Laser irradiation position confirmation function	Light source		Blue LED (405 nm)
Temperature characteristic			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529)^*10
	Ambient light		Incandescent lamp: 10,000 lux or less^*11
	Ambient temperature		0 to +45°C^*12
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, double amplitude 1.5 mm; 3 hours each for X, Y, and Z axes
	Shock resistance		15 G / 6 msec
Material			Aluminium
Weight			Approx. 1000 g
^1 Classification performed based on IEC60825-1 in accordance with FDA (CDRH) Laser Notice No. 56. ^2 Do not view the beam directly using optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Observing the laser output using optical instruments is dangerous and may damage the eyes. ^3 Values measured by averaging 4096 times at the reference distance. ^4 The measured target is a KEYENCE standard target. Value when the average height of the default setting area is measured with height and position tools. All other settings are default values. ^5 The measured target is a pin gauge. Value when the point of intersection for the pin gauge rounded surface and edge level is measured using height and position tools. All other settings are default values. ^6 The measured target is a KEYENCE standard target. Profile data when measured by smoothing 64 times and averaging 8 times. All other settings are default values. Values inside parentheses are representative examples of averages for all profile data. ^7 The profile data interval can be changed. If changed, the measurement range in the X direction will also change. ^8 Values inside parentheses cannot be used when connecting with LJ-X8000A. ^9 A characteristic that allows for stable, high-precision measurement with a single capture (exposure) at all levels of reflectance, from black (low) to glossy surfaces (high). ^10 The value when a head cable (CB-B) or extension cable (CB-BE) is connected. Does not include CB-B*L connection. ^11 When measuring white paper, illuminance on the sensor head receiving surface when light is applied to white paper. ^*12 The head needs to be mounted to a metal plate to be used.

Data Sheet (PDF) Other Models