Digital Fibre Optic Sensors

FS-N series

Catalogues View Catalogue

Fibre Amplifier, M8 Connector Type, NPN FS-N15CN

FS-N15CN - Fibre Amplifier, M8 Connector Type, NPN

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Manuals

CAD Data

360°view (3D PDF)

Software

  • CE Marking
  • UL Listing(c/us)

Specifications

Model

FS-N15CN

Type

1 output type

Output

NPN

Input/Output configuration

M8 connector *1

Main unit/Expansion unit

Main unit

Control output

1 output
NPN open collector 24 V or less; maximum 100 mA or less, residual voltage 1 V or less

External input

1 input
Input time 2 ms (ON)/20 ms (OFF) or more, when selecting External calibration 25 ms (ON/OFF) or more

Output toggle

LIGHT-ON/DARK-ON (switch-selectable)

Light source

Red, 4-element LED (Wavelength: 630 nm)

Timer function

Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer

Response time

50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)

Number of interference prevention units

0 units (connection not possible)

Case dimensions

H30.3mmxW9.8mmxL71.8mm

Unit expansion

0 units (expansion not possible)

Protection circuit

Reverse polarity protection, Over-current protection, Surge absorber

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Current Consumption

Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V) *2
Econ on (ALL): 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V) *2
Eco full: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)

Environmental resistance

Enclosure rating

IP66*3*4

Ambient light

Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less

Ambient temperature

-20 to +55 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s2, 3 times in each of the X, Y, and Z directions

Case material

Main unit: glass-reinforced PBT; Cover: Sulfonic resin

Material

Adapter

Glass-reinforced PBT

Weight

Approx. 30 g

*1 Use a cable of 30 m or less.
*2 When the Power Mode is set to HIGH SPEED, 100 mW (4.0 mA) will be added.
*3 About the enclosure rating when a small-diameter fibre unit (the diameter of the cable is ø1.3 or ø1.0) is used. IP66/IP65 cannot be satisfied when the type whose diameter is ø1.3 and terminal can be separated (FU-4F/ 66/91/93/43/63/63T etc.) is used. When any small-diameter fibre units except for the above are used, IP65 is applied.
*4 In any of the following cases, the enclosure rating IP66/IP65 cannot be satisfied.
When the Fibre Unit and KEYENCE's M8 connector cable are not connected (Recommended conditions to tighten up the M8 connector: Tighten it by hand first.Then retighten it as much as 1/16-1/8 of a rotation with pliers.)
When the Fibre Unit and KEYENCE's M8 connector cable are not connected
When the dust cover of the Sensor Amplifier is open
When there is debris in the dust cover
When the waterproof adapter A/B are not used at the time of installation of a small-diameter fibre unit.

Data Sheet (PDF) Other Models