Recent Searches
    Series ( results)
      Models ( results)
        Keywords

          Multi-DisplayMT series

          MT-200

          Touch Panel Display

          [Discontinued model]

          This model has been discontinued.

          Recommended Replaceable Products
          To contact us:

          SPECIFICATIONS

          Select Language

          Model

          MT-200

          Type

          Dot matrix LCD panel (full graphic type)

          General specifications

          Rating

          Power voltage

          24 VDC +10%, -5%

          Current consumption

          0.4A or less

          Environmentalresistance

          Operating ambient temperature

          +10 to 40°C

          Operating ambient humidity

          35 to 85%RH (no condensation)

          Noise resistance

          1,000 Vp-p, 1 µs (power supply noise)

          I/O unit specifications

          BUSY output

          Output

          NPN open collector

          Rated load

          30 mA maximum (24 VDC or less)

          Alarm output

          Output

          NPN open collector

          Rated load

          0.3 A maximum (24 VDC or less)

          Parallel Interface

          Data input Page strobe input Address strobe input Data strobe input Function strobe input Area strobe input Data digit specification Count/reset input

          Input rating

          24 VDC

          Minimum ON voltage

          19V

          Maximum OFF current

          2mA

          Minimum input pulse width

          35ms

          Serial I/O

          Applied standard

          Conforms to EIA RS232C (excluding the connector shape)

          Synchronisation between the transmitter and receiver

          Start-stop (full duplex)

          Transmission code

          ASCII

          Data bit length

          8 bits

          Stop bit length

          1 bit, 2 bits (switchable)

          Parity check

          Even, odd, none (switchable)

          Baud rate

          1,200, 2,400, 4,800, 9,600 bps (switchable)

          Display panel specifications

          LCD display panel

          Effective display area

          127.16x33.88mm

          Number of dots

          240 × 64 dots

          Dot size

          0.49x0.49mm

          Dot pitch

          0.53mm

          LCD life span

          50,000 hours

          Backlightlamp

          CFL (cold cathode tube), 10,000-hour life minimum (20,000 hours on average),*1 (25°C)

          Display characters

          x1/4

          8 x 8 dots

          212 characters (alphanumeric, katakana, symbols)

          Half-width

          8 x 16 dots

          Full-width

          16 x 16 dots

          2,965 characters (kanji (JIS standard 1)), 524 characters (alphanumeric, hiragana, katakana, Greek characters, Russian characters, symbols), 381 characters (special symbols), 16 characters (custom*1

          x2, vertical

          16 x 32 dots

          x4

          32 x 32 dots

          x9

          48 x 48 dots

          x16

          64 x 64 dots

          Internal registration screen

          Main unit built-in SRAM

          Main unit built-in SRAM:*2 120 screens (1 file)

          External registration screen

          Memory card SRAM (128 kB)

          Memory card SRAM:*2 224 screens (6 files)

          Display function

          All character sizes can be used on a single screen, blinking display, inverted display, backlight on or off, key paging, auto paging, overlap display, numeric value data insertion

          *1 Custom characters can only be registered from a PC.
          *2 The lithium battery is used to back up memory. (5-year life when stored between 10 and 40°C)

          Downloads:

          Downloads

          • PLC/HMI User Support
          • General Catalogue Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Controls