RGB Output Unit (for VT3) VT3-R1

VT3-R1 - RGB Output Unit (for VT3)

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Specifications

Model				VT3-R1
General specifications	Current consumption			80mA or less
	Power voltage			5 VDC ±5%
	Noise resistance			1,500 Vp-p, pulse width: 1 µs (common mode, by way of a noise simulator)
	Withstand voltage			1500 VAC 1 minute (between power terminal and housing)
	Insulation resistance			5 MΩ or more, tested with a 500 VDC megger (between the power supply terminal and the case)
	Vibration resistance	Intermittent vibration	Frequency: 5 to 9 Hz	Amplitude: 3.5 mm^*1
			Frequency: 9 to 150 Hz	Acceleration: 9.8 m/s²^*1
		Continuous vibration	Frequency: 5 to 9 Hz	Amplitude: 1.75 mm^*1
			Frequency: 9 to 150 Hz	Acceleration: 4.9 m/s² ^*1
	Operating environment			Minimal amount of dust and corrosive gas present
	Ambient operating temperature			0 to +50°C^*2
	Ambient operating humidity			35 to 85%RH (No condensation)^*3
	Ambient storage temperature			-10 to +60°C (No freezing)
	Ambient storage humidity			35 to 85%RH (No condensation)^*3
	Weight			Approx 150 g
Performance specifications	RGB input	Signaling system		Analogue RGB
		Horizontal synchronization frequency		VGA: 31.5 kHz, SVGA: 37.9 kHz, XGA: 48 kHz
		Vertical synchronization frequency		VGA: 59.9 Hz, SVGA: 60.3 Hz, XGA: 59.9 Hz
		Display size		VGA: 640×480, SVGA: 800×600, XGA: 1,024×768 (W x H dots)
		Number of output channels		1
^1 Conforms to JIS B 3502, IEC61131-2 Number of sweeps: 10 times respectively in the X, Y, and Z directions (100 minutes) ^2 Do not exceed the ambient operating temperature of the VT3 main unit. ^*3 When the ambient temperature is higher than 40°C, please use it in the condition of an absolute humidity of 85%RH at 40°C.

Data Sheet (PDF) Other Models