Recent Searches
    Series ()
      Models ()
        Keywords

          Programmable Logic ControllerKV-7000 series

          KL-16BR

          16-point Screw Terminal Block, Relay Output

          SPECIFICATIONS

          Select Language

          Model

          KL-16BR

          General Specifications

          Power voltage

          10.8 to 26.4 VDC (for the connector type I/O unit, this is supplied by the dedicated cable)

          Operating ambient temperature

          0 to 60°C

          Operating ambient humidity

          35 to 85%RH (no condensation)

          Withstand voltage

          500 VAC for 1 minute (between the power supply terminal and the I/O terminals; excluding the ERR output terminal)

          Noise immunity

          Power supply common: 1,500 V, power supply normal: 500 V, pulse width: 1 ms, 50 ns (by way of a noise simulator)

          Insulation resistance

          -

          Operating environment

          No corrosive gas present

          General specifications

          Disconnection error output load

          30 VDC, 0.1 A or less, residual voltage: 1 V or less

          Vibration resistance

          10 to 55 Hz, 1.5 mm or less double amplitude for 2 hours in each of the X, Y, and Z directions; 1 G when attached to a DIN rail

          Input specifications

          Insulation system

          -

          Input maximum rating

          Performance specifications

          Input voltage

          Minimum ON voltage

          Maximum OFF current

          Input specifications

          Maximum OFF voltage

          Performance specifications

          Input impedance

          Number of inputs/outputs

          16-terminal terminal block relay output

          Output specifications

          Output

          -

          Residual voltage (when output is ON)

          Leakage current (when output is OFF)

          transistor output

          Rated load voltage

          Rated output current

          Common ground

          ON delay time

          OFF delay time

          Insulation resistance

          Insulation system

          relay output

          Rated voltage

          AC250V/DC30V

          Rated output current

          2 A/output (inductive load), 4 A/output (resistive load), 4 A/all commons

          Common ground

          Written on the terminal wiring diagram of each unit

          ON resistance

          50 mΩ or less

          ON delay time

          10ms or less

          OFF delay time

          Insulation resistance

          20 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminals; excluding the ERR output terminal)

          Insulation system

          Relay isolation

          Performance specifications

          Internal current consumption

          310mA or less

          Weight

          approx 210g

          • PLC/HMI User Support
          • General Catalogue Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Controls