Recent Searches
    Series ()
      Models ()
        Keywords

          Programmable Logic ControllerKV-7000 series

          KV-EP02

          EtherNet/IP Compatible Communication Unit

          SPECIFICATIONS

          Select Language

          Model

          KV-EP02

          General specifications

          Supply voltage

          24 VDC (+10% / -15 %)

          Operating ambient temperature

          0 to +55°C (no freezing)*1*2

          Operating ambient humidity

          5 to 95 % RH (no condensation)*1

          Storage ambient temperature

          -25 to +75°C

          Storage ambient humidity

          5 to 95 % RH (no condensation)*1

          Operating environment

          No dust or corrosive gas

          Operating altitude

          2,000 m or less

          Pollution degree

          2

          Overvoltage category

          I

          Noise immunity

          1,500 Vp-p or more; pulse width: 1 µs, 50 ns (based on noise simulator);
          IEC standard-compliant (IEC61000-4-2/3/4/6)

          Withstand voltage

          1,500 VAC for 1 minute between the power terminals and the I/O terminals, and between the external terminals and the housing
          (1,000 VAC for 1 minute between the power supply terminal and output terminals for the transistor output type expansion I/O unit)

          Insulation resistance

          50 MΩ or more (between the power terminals and the input terminals and between the external terminals and the housing, with 500 VDC megohmmeter)

          Vibration resistance

          Intermittent vibration

          5 to 9 Hz

          When mounted on a DIN rail: Half amplitude: 3.5 mm*3

          9 to 150 Hz

          When mounted on a DIN rail: Acceleration: 9.8 m/s2*3

          Continuous vibration

          5 to 9 Hz

          When mounted on a DIN rail: Half amplitude: 1.75 mm*3

          9 to 150 Hz

          When mounted on a DIN rail: Acceleration: 4.9 m/s2*3

          Shock resistance

          When mounted on a DIN rail: Acceleration: 150 m/s2; operation time: 11 ms; 3 times in each of the X, Y, and Z directions

          Internal current consumption

          120 mA or less*4

          Weight

          Approx. 130 g

          Performance specifications

          Connection interface

          RJ-45 8-position modular connector x 2 ports

          Transmission rate

          10BASE-T: 10 Mbps, 100BASE-TX: 100 Mbps*5

          Transmission media

          10BASE-T: Category 3 or higher UTP or STP (STP is recommended)
          100BASE-TX: Category 5 or higher UTP or STP (STP is recommended)*6

          Maximum cable length

          100 m*7

          Maximum number of connectable hubs

          10BASE-T: 4, 100BASE-TX: 2*8

          EtherNet/IPTMspecifications

          Supported functions

          Cyclic communication,Message communication (explicit message communication),UCMM, and Class 3 support

          Number of connections

          64

          RPI (communication cycle)

          0.5 to 10,000 ms (0.5 ms unit)

          Trigger

          Cyclic

          Conformance test

          Compliant with CT14

          *1 Guaranteed range in which the system can be used.
          *2 The temperature below the unit centre (30 mm) inside a control panel.
          *3 Compliant with JIS B 3502 and IEC61131-2.No. of scans: 10 times in each of the X, Y, and Z directions (for 100 min.)
          *4 The maximum current consumption including that of expansion units is 1.8 A.
          *5 10 Mbps/100 Mbps MDI/MDI-X automatic switching function supported
          *6 STP = Shielded twisted pair cable; UTP = Unshielded twisted pair cable
          *7 The maximum cable length refers to the distance between the KV-EP02 and the Ethernet switch.
          *8 The maximum number is not limited when an Ethernet switch is used.

          • PLC/HMI User Support
          • General Catalogue Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Controls