Recent Searches
    Series ()
      Models ()
        Keywords

          Digital Pressure Sensor with 2-Colour DisplayAP-C40 series

          AP-C40WP

          Amplifier Unit PNP

          SPECIFICATIONS

          Select Language

          Model

          AP-C40WP

          Type

          Amplifier Unit, PNP

          Applicable sensor head

          AP-41M, AP-41, AP-43, AP-44, AP-48

          Set and display range

          -15 to +110 % of F.S.*1

          Display

          3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s

          Repeatability

          ±0.2 % of F.S.

          Operation indicator

          Red LED x 2 (corresponding to control output 1 and 2)

          Display resolution

          AP-41M/41: Standard mode 0.1 kPa, High-resolution/Focus mode 0.01 kPa
          AP-43: Standard mode 0.001 MPa, High-resolution/Focus mode 0.1 kPa
          AP-44/48: Standard mode 0.1 kPa, High-resolution/Focus mode 0.02 kPa

          Power consumption

          Normal

          12 V: 960 mW (80 mA) max., 24 V: 1,400 mW (60 mA) max.

          Display temperature characteristic

          ±1 % of F.S. max.

          Hysteresis

          Variable (Standard: 0.5 % of FS; high-resolution/focus mode: 0.1 % of F.S.)

          Response time (Chattering prevention function)

          1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable)

          I/O

          Analogue output

          1 to 5 V with load impedance of 1 kW max. (or zero-shift input selectable)

          Zero-shift input

          Input time: 2 ms or more (or analog output selectable)

          Control output

          PNP open collector 100 mA max. (at 30 V or below) with max., residual voltage of 1 V, 2 outputs (NO or NC selectable)

          Rating

          Power voltage

          12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

          Power consumption

          Eco mode

          12 V: 660 mW (55 mA) max., 24 V: 1,080 mW (45 mA) max.

          Environmental resistance

          Ambient temperature

          0 to +50 °C (No freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

          Material

          Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate

          Accessories

          Power supply code (2-m cable with connector), head connector, and unit seal

          Weight

          Approx. 74 g (with 2-m cable)

          *1 The focus range applies while in focus mode only.

          • General Catalogue Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Process Controls / Process Sensors