Recent Searches
    Series ()
      Models ()
        Keywords

          Ultra-small Digital Laser SensorLV-S series

          LV-12SA

          Amplifier Unit, Expansion Unit, NPN

          SPECIFICATIONS

          Select Language

          Model

          LV-12SA

          Type

          Expansion unit (1 line)

          Main unit/Expansion unit

          Applicable model

          LV-S61/S41/S41L/S31/S71/S72

          Control output

          NPN open-collector × 2 channels, 40 VDC maximum, 100 mA or less per output

          Response time

          ExceptLV-S31

          ULTRA

          4 ms

          SUPER

          2 ms

          TURBO

          500 µs

          FINE

          250 µs

          HSP

          80 µs

          LV-S31standard mode

          500 µs

          LV-S31standard mode

          SPED2

          2 ms

          SPED3

          8 ms

          SPED4

          32 ms

          LV-S31High-speed mode

          250 µs

          Control input

          Light emission stop input, external calibration, set value bank selection input, or received light intensity shift input

          Number of interference prevention units

          ULTRA

          4

          SUPER

          TURBO

          2

          FINE

          HSP

          0

          Unit expansion

          Up to 16 units (17 units total including the main unit)*1

          Rating

          Power voltage

          12 to 24 VDC, Ripple (P-P) 10 % or less, Class 2*2

          Power consumption

          Normal

          1.5 W or less (62.5 mA or less at 24 V)

          Ratings

          Eco-Half Eco-All

          1.35 W or less (57.3 mA or less at 24 V)

          Environmental resistance

          Ambient temperature

          -10 to +55 °C (No freezing)*3

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis

          Material

          Main unit

          Main body, cover: Polycarbonate

          Weight

          Approx. 80 g (including 2 m cable)

          *1 When extended, the ambient usage temperature varies according to the following conditions.
          Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is
          *2 When more than 8 units connected, be sure to use supply voltage 24 VDC Ripple (P-P) 10 % max.
          *3 To connect several units they must be mounted on a METAL DIN rail. Ensure that the output current is 20 mA max. With several units connected, the allowable ambient temperature range varies as follows: 1 to 2 units connected: -10 to +55 °C, 3 to 10 units connected: -10 to +50 °C, 11 to 16 units connected: -10 to +45 °C

          • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
          • General Catalogue Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Sensors