Recent Searches
    Series ()
      Models ()
        Keywords

          Built-in amplifier photoelectric sensorsPZ-G series

          PZ-G51P

          Square Transmissive Cable Type, PNP

          SPECIFICATIONS

          Select Language

          Model

          PZ-G51P

          Type

          Thrubeam
          Standard

          Shape

          Rectangular

          Output

          PNP

          Cable connection

          Cable (2 m) *1

          Detecting distance

          20 m

          Spot diameter

          Light source

          Red LED

          Sensitivity adjustment

          1-turn trimmer (230°)

          Response time

          500 µs

          Operation mode

          LIGHT-ON/DARK-ON (switch-selectable)

          Indicators (LED)

          Power (T): Orange LED
          Output (R): Orange LED
          Stable operation: Green LED
          Light receiving: Red LED

          Control output

          Open collector output, 30 V max., 100 mA max., Residual voltage: 1 V max.

          Protection circuit

          Reversed polarity, overcurrent protection, surge absorber

          Interference suppression

          Up to 2 units
          (When polarization
          filters are attached)

          Tightening torque

          Rectangular models (Mounting hole part): 0.5 N m max.

          Rating

          Power voltage

          10 to 30 VDC, including Ripple (P-P) 10 %

          Current consumption

          Transmitter: 20 mA or less, Receiver: 28 mA or less

          Environmental resistance

          Enclosure rating

          IEC: IP67/NEMA: 4A, 6, 12/DIN: IP69K

          Ambient light

          Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.

          Ambient temperature

          -20 to +55 °C (No freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

          Shock resistance

          1,000 m/s2, 6 times in each of the X, Y, and Z directions

          Material

          Housing, M18 nut(threaded models only)

          Glass-fibre reinforced PBT

          Lens cover

          Polyarylate (PAR)

          Trimmer

          Glass-fibre reinforced polyamide (PA)

          Case connection

          Screw: Nickel-plated iron and zinc, packing: nitrile butadiene rubber (NBR)

          Cable (cable models only)

          Polyvinyl chloride (PVC)

          Connector (connector type with cable only)

          Accessories

          Instruction manual

          Weight

          Rectangular cable models: Approx. 60 g (Thrubeam-models transmitter: Approx. 50 g)

          *1 Cable sold separately for connector models

          • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
          • General Catalogue Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Sensors