Recent Searches
    Series ()
      Models ()
        Keywords

          High-Accuracy Digital Contact SensorGT2 series

          GT2-71MCN

          Amplifier Unit, Analog Output Type NPN

          SPECIFICATIONS

          Select Language

          Model

          GT2-71MCN

          Output

          NPN output

          Mounting type

          DIN-rail mount*1

          Main unit/Expansion unit

          Main unit

          Power supply voltage

          20 to 30 VDC, including 10 % ripple (P-P), Class 2*2

          Power consumption

          Normal

          2,700 mW or less (90.0 mA or less at 30 V)

          Power saving (Eco)

          Eco half: 2,300 mW or less (76.7 mA or less at 30 V), Eco all: 2,200 mW or less (73.3 mA or less at 30 V)

          Display range

          -199.999.9 to 199.999.9

          Display resolution

          0.1 μm

          Control input

          Timing/preset/
          reset/bank input

          No-voltage input

          Control output

          HH/HI/GO/LO/LL

          NPN open collector, 40 V 50 mA or less, residual voltage 1 V or less*2*3

          Analogue output

          4 to 20 mA with a max. load resistance of 350 Ω
          Set response time +1 ms

          Response time

          hsp (3) /5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp (12) /20/40/400/2,000/4,000 ms)

          Environmental resistance

          Ambient temperature

          -10 to +50 °C (GT2-71MCN/71MCP: -10 to +45 °C when expansion unit (s) is connected)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

          Materials

          Main body case/front cover: polycarbonate (PC), Key top: polyacetal (POM),
          Front sheet: polyethylene terephthalate (PET), Cable: polyvinyl chloride (PVC)

          Weight

          Approx. 70 g (not including the GT2-CA2M/CA5M/CA10M)

          *1 When using the DIN-rail mount type, always mount it to a DIN-rail (mounted to a metal plate), and when adding expansion units, always use the end unit (OP-26751).
          *2 When adding expansion units, there are the following restrictions according to the number of connected units.
          [When 2 to 8 units are connected including the main unit]
          Power supply voltage: 20 to 30 VDC, Control output current: 20 mA or less, (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C
          [When 9 to 15 units are connected including the main unit]
          Power supply voltage: 20 to 30 VDC, Control output current: 10 mA or less (including the DL-RB1A output current), Residual voltage: 1.5 V or lower, (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C
          *3 The GT2-71MCN(P) does not have HH/LL.

          Contact Sensor Tips

          Sensors