Specs AI-Powered Code Reader SR-X series

Main unit

Model

SR-X300 *1

SR-X300W *1

SR-X100 *5*1

SR-X100W *5*1

Image

Type

SR-X300: Standard type (2.3 megapixels)
SR-X300 + SR-XHR: High-resolution type

Wide-field type (2.3 megapixels)

Standard type (1.4 megapixels)

Wide-field type (1.4 megapixels)

Receiver

Sensor

CMOS image sensor

Number of pixels

1920 × 1200

1360 × 1024

Focus

Auto*2

Emitter

Illumination light source

High-intensity red/white LED*3

High-intensity red LED*3

Pointer light source

High-intensity green LED*3

Reading specifications

Supported symbols

2D codes

QR, MicroQR, DataMatrix(ECC200), DMRE, GS1 DataMatrix, PDF417, MicroPDF417,
GS1 Composite (CC-A/CC-B/CC-C), DotCode, Maxi Code, Aztec Code

Barcodes

CODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93,
JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode, Postal (Japan Postal, IMB)

Minimum resolution

2D codes

SR-X300: 0.024 mm
SR-X300 + SR-XHR: 0.010 mm

0.060 mm

0.024 mm

0.060 mm

Barcodes

0.082 mm

Reading distance

SR-X300: 70 to 1000 mm
SR-X300 + SR-XHR: 32 to 47 mm

50 to 1000 mm

70 to 1000 mm

50 to 1000 mm

Reading field of view

SR-X300: 104 × 65 mm
(at a distance of 300 mm)
SR-X300 + SR-XHR: 12.3 × 7.7 mm
(at a distance of 47 mm)

267 × 166 mm
(at a distance of 300 mm)

74 × 55 mm
(at a distance of 300 mm)

189 × 142 mm
(at a distance of 300 mm)

I/O specifications

Control input

Number of inputs

2

Input type

Bidirectional voltage input

Maximum rating

30 VDC

Minimum ON voltage

15 VDC

Maximum OFF current

0.2 mA

Control output

Number of outputs

3

Output type

Photo MOS relay output

Maximum rating

30 VDC

Maximum load current

50 mA or less for 1 output, or 100 mA or less in total for 3 outputs

Leakage current when OFF

0.1 mA or less

Residual voltage when ON

1 V or less

Ethernet

Communication standard

IEEE 802.3-compliant 100BASE-TX

Supported protocols

TCP/IP, SNTP, FTP, SFTP, HTTP, HTTPS, BOOTP, EtherNet/IP™, PROFINET,
KV STUDIO, MC protocol, OMRON PLC link

Serial communication

Communication standard

RS-232C-compliant

Communication speed

600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps

Supported protocols

No-protocol, KV STUDIO, MC protocol, SYSWAY

USB

Communication standard

USB 2.0 High Speed compliant

Ratings

Power voltage

24 VDC +25%/-20%

Current consumption

Approx. 750 mA

Approx. 650 mA

Environmental resistance

Enclosure rating

IP65/IP67 (IEC60529)*4

Ambient temperature

0 to +45°C

Storage temperature

-10 to +50°C

Relative humidity

35 to 85% RH (No condensation)

Storage relative humidity

Weight

SR-X300: Approx. 200 g
SR-X300 + SR-XHR: Approx. 225 g

Approx. 200 g

Approx. 180 g

*1 System ROM rewrites: 100000
*2 The focal position can be adjusted automatically during installation or tuning.
*3 LEDs and lamps are classified as shown below according to IEC 62471 (JIS C 7550).
• Exempt group: Objects that do not cause any photobiological damage.
• Risk group 1 (low risk): Objects that do not cause damage that makes constraints on normal actions necessary.
• Risk group 2 (moderate risk): Objects that do not cause damage accompanied by unpleasant feelings and thermal discomfort.
• Risk group 3 (high risk): Objects that cause damage even due to temporary or short-term exposure.
The risk groups for this product are listed below.
Pointer light source (Green): Risk group 1
Illumination light source (Red): Risk group 1
Illumination light source (White), Advance only: Risk group 1
*4 Attach a USB port cover to meet the protective structural specification.
*5 SR-X100 series does not support the AI filter function.

Back to top

Setup software (AutoID Network Navigator)

Model

SR-H8W*1*2*3

Image

Operating System

Windows 10 Pro or later, 32 bit/64 bit
Windows 8 Pro or later, 32 bit/64 bit (excluding Windows RT)

Running environment

Processor: 2.0 GHz or better, Memory: 8 GB or more, Free space on hard disk drive: 1 GB or more (free space for saving other data is also required),
DVD-ROM drive: Required during installation, Screen resolution: 1440 × 1080 or higher

*1 .NET Framework 4.6.1 or later must be installed.
*2 Microsoft Visual C++ Redistributable Package (x86) for Visual Studio 2015, 2017, and 2019 must be installed.
*3 Windows, Visual Studio, Microsoft Edge, Internet Explorer, and Excel are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Back to top

Main unit

Model

SR-EC1

SR-PN1

Image

Type

EtherCAT® communication unit

PROFINET communication unit

Network Specifications

Compatible Networks

EtherCAT®

PROFINET

Transmission Speed

100 Mbps

Connector Type

M12, 4-pin, female, D-code

network EtherCAT® PROFINET

CoE

Conformance Class C

Power Supply Specifications

Connector Type

IN: M12, 5-pin, male, L-code OUT: M12, 5-pin, female, L-code

Power Voltage

24 VDC, -20 to +25%

Allowable Current

V1, V2: Max. 16 A each; Total: 24 A *1

Power Consumption

Approx. 1.6 W

Environmental resistance

Enclosure rating

IP65/67 (IEC 60529)

Ambient temperature

0 to +45°C

Storage temperature

-10 to +50°C

Relative humidity

35 to 85% RH (no condensation)

Storage relative humidity

Weight

Approx. 270 g

*1 Use a load of 12 A or less for each of V1 and V2 and a total load of 20 A or less when using OP-88782 to OP-88787 power cables.

Back to top