LCD Display Electronic Preset Counter

RC series

Catalogues View Catalogue

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

48-mm□ 6-digit 7-segment LCD, One-stage Preset, with Timer, DC Power Supply RC-15

RC-15 - 48-mm□ 6-digit 7-segment LCD, One-stage Preset, with Timer, DC Power Supply

Specifications

Model

RC-15

Type

1-level preset counter/timer, DC type

Function selection

Counter, timer (switchable by way of a switch)

Operation method

Addition, subtraction, addition and subtraction (phase difference)

Operation mode

Counter: over count, auto reset, range distinction
Timer: on delay, one-shot, flicker, range distinction

Return method

Manual reset, external reset, automatic reset (counter: in auto reset mode, timer: in flicker mode)

Display power

7-segment LCD (character height: 8.5 mm)

Number of digits

6-digit display (zero suppression method)

Power off memory time

Service life: Approx 10 years at 20°C

Timer accuracy

100 hours: ±0.01% ± 1 s (percentage of the time-up value), 1,000 seconds: ±0.01% ± 1 ms (percentage of the time-up value)

Mounting method

Panel mount (embedding), surface mount, DIN rail mount

Highest counting speed

With contacts: 30 c/s, without contacts: 1 kc/s (1:1 ON:OFF ratio)

Input signal

Non-voltage input (contact or solid-state) (Count input, inhibit input, reset input)

Output

Control output

Maximum NPN open-collector output: 100 mA (40 V or less), residual voltage: 1 V or less*1

Control output

Solid-state

Open-collector output: 15 ms or less (when set to 30 c/s), 2 ms or less (when set to 1 kc/s)

DC output

-

Rating

Power voltage

12 to 24 VDC ±10 %

Power consumption

-

Current consumption

45 mA or less

Noise resistance

Square-wave noise by noise simulator: 1.2 kVp-p, 1 µs (across power terminals)

Environmental resistance

Ambient temperature

-10 to +50 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Weight

Approx. 75 g

*1 NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNP Output Converter.

Other Models