LCD Display Electronic Preset Counter
RC series
48-mm□ 4-digit 7-segment LED, One-stage Preset, AC Power Supply RC-18
*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.
Specifications
Model | RC-18*1 | |||
Type | 1-level preset counter/timer, DC type | |||
Operation method | Addition, subtraction | |||
Operation mode | Over-count and auto-reset | |||
Return method | Manual, External, Automatic (auto-reset) | |||
Display power | 7-segment LED | |||
Number of digits | 4 (with zero suppress function) -999 to 9999*2 | |||
Power off memory time | Service life: Approx 10 years at 20°C | |||
Mounting method | Flush (panel) mounting, surface mounting, DIN-rail mounting*3 | |||
Highest counting speed | Contact input: 30 c/s, solid-state input: 5 kc/s (ON-OFF ratio 1:1) | |||
Input signal | Non-voltage input (contact or solid-state) (Count input, inhibit input, reset input) | |||
Output | Control output | Relay output: SPDT, 250 VAC, 3 A (resistive load) | ||
Control output | One-shot output time | 0.01 to 0.5 s (variable) | ||
Solid-state | Relay output: 24 ms max. (when set to 30 c/s) | |||
DC output | 12 VDC ±10%, 50 mA max. | |||
Rating | Power voltage | 100 to 240 VAC ±10 %, 50/60 Hz | ||
Power consumption | 9VA or less | |||
Current consumption | - | |||
Environmental resistance | Insulation resistance | 100 MΩ min. | ||
Noise resistance | Square-wave noise by noise simulator: 2 kV p-p, 1 µs (across power terminals) | |||
Environmental resistance | Ambient temperature | -10 to +50 °C (No freezing) | ||
Relative humidity | 35 to 85 % RH (No condensation) | |||
Withstand voltage | 1,000 VAC, 1 minute (across terminal and casing) | |||
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |||
Shock resistance | 100 m/s2, 3 times in each of the X, Y, and Z directions | |||
Weight | Approx. 170 g | |||
*1 This product does not comply with CE marking. |