Expandable Area Sensor

PJ series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Small & Robust Safety Light Curtain - GL-V series

Expansion Unit PJ-F41

PJ-F41 - Expansion Unit

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Manuals

CAD / CAE

Specifications

Model		PJ-F41
Type		Extension unit A
Number of optical axes		4
No. of connectable units		8 (base unit × 1 + extension unit A or B × 7) or less^*1
Beam axis spacing		40mm^*2
Maximum optical axis number		32 (PJ-F40 × 1 + PJ-F41 × 7)^*3
Detection area		120 mm (4 optical axes) to 1,240 mm (32 optical axes)^*4
Detecting distance		7m
Detectable object		Opaque material with a diameter of 48 mm or more
Light source		Infrared LED
Indicator lamp		A string of 8, 2-Colour LEDs (red and green) for the transmitter and receiver
Response time		When output turned off : 7.5 ms or less, when output turned on : 15 ms or less
Controloutput	Operation mode	Turned on when light is being applied to all optical axes
Self-diagnostic output		Turned off when an error (control output damage, transmitter element or circuit damage, receiver element or circuit damage, ambient light input, cable disconnections, and LSI errors) is detected
Protection circuit		Overcurrent protection, surge absorber, reversed polarity protection
Cable	Transmitter	4-core shielded cable (0.5 mm²), length : 7 m, gray sheath
	Receiver	4-core shielded cable (0.5 mm²), length : 7 m, black sheath
	Extend	Use a shielded cable with a nominal cross section of 0.5 mm² or more to extend the cable by up to 20 m for both the transmitter and receiver.
Controloutput	Output specifications	Maximum NPN open-collector output : 100 mA (40V or less), residual voltage : 1.0 V or less
Self-diagnostic output
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	20 mA (total of T, R)
Environmental resistance	Enclosure rating	IP65
	Ambient light	Incandescent lamp: 3,500 lux or less, Sunlight: 12,000 lux or less
	Ambient temperature	-10 to +55 °C (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 0.7 mm, 20 times in each of the X, Y, and Z directions
	Shock resistance	100 m/s², 1,000 times in each of the X, Y, and Z directions
Material		Case : aluminum, lens cover : polyarylate
Weight		Approx. 320 g
^1 Mixed expansion at a 20 mm or 40 mm pitch is possible. The number of units that can be connected in a mixed expansion is 8 units or less. ^2 When the PJ-F41 / F42 has been added to the PJ-F20 / F21, the optical axis pitch of added unit is 40 mm, and 20 mm when the PJ-F21 / F22 has been added to the PJ-F40 / F41. ^3 When performing mixed expansion at a 20 mm or 40 mm pitch, there is no limit on the number of axes if the number of connected units is 8 or less. ^4 With mixed expansion, this becomes 140 mm [when the PJ-F20 is used] or 120 mm [when the PJ-F40 is used] +20 mm x (the number of 20 mm pitch extension optical axes) +40 mm x (the number of 40 mm pitch extension optical axes).

Data Sheet (PDF) Other Models