Amplifier Separate Type Photoelectric Sensor

PS-T series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Amplifier Separate Type Photoelectric Sensor - PS-N series

Amplifier Unit, Zero-line Expansion Unit PS-T0

PS-T0 - Amplifier Unit, Zero-line Expansion Unit

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		PS-T0
Type		0-line connection
Output		NPN
Response time		660 µs to1.2 ms ^*1
Operation mode		LIGHT-ON/DARK-ON (switch-selectable)
Indicator lamp		Output indicator: Red LED, Stable operation indicator: Green LED, Calibration indicator: Yellow LED
Timer function		ON-delay: 40 ms, OFF-delay: 40 ms, Timer OFF (switch-selectable)
External calibration input signal		―
Control output		―^*2
Stability output		―^*3
Protection circuit		Reverse polarity protection, Over-current protection, Surge absorber
Multiple connections to Expansion units		Up to 16 expansion units can be connected (a total of 17 units)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	35 mA or less
Environmental resistance	Ambient temperature	-10 to +55 °C (No freezing)^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material		Body/Cover: Polycarbonate
Weight		Approx. 20 g^*5
^1 The response speed varies depending on the number of units connected. ^2 There is no control output cable for the PS-T0. Control output for the PS-T0 is sent from the FS-R0. ^3 Power for the PS-T2 (P)/T0 is supplied through the PS-T1, FS-T1, FS-M1 or FS-R0. ^4 When several units are connected, the ambient temperature requirement varies depending on the total number of units connected. When 3 to 10 units: -10 to +50 °C (14 to 122 °F) When 11 to 16 units: -10 to +45 °C (14 to 113 °F) When connecting several units, be sure to mount the units to a metallic DIN rail. Make sure that the output current does not exceed 20 mA. ^*5 The PS-T0 has no cable.

Data Sheet (PDF) Other Models