High-definition Touch Panel Display

VT2 series

This model has been discontinued.

Recommended Replaceable Products: RGB Output Unit (for VT3) - VT3-R1

RGB Output Unit (for VT2) VT2-R1

VT2-R1 - RGB Output Unit (for VT2)




General specifications

Current consumption

0.5W or less

Power voltage

5 VDC ±5%

Noise resistance

1,500 Vp-p, pulse width : 1 µs (common mode, by way of a noise simulator)

Withstand voltage

1500 VAC 1 minute (between power terminal and housing)

Insulation resistance

5 MΩ or more, tested with a 500 VDC megger (between the power supply terminal and the case)

Operating environment

Minimal amount of dust and corrosive gas present

Ambient operating temperature

0 to +50°C*1

Ambient operating humidity

35 to 85%RH (No condensation)*2

Ambient storage temperature

-10 to +60°C (no freezing)

Ambient storage humidity

35 to 85%RH (No condensation)*2

Vibration resistance

Intermittent vibration

Frequency : 10 to 57Hz

Amplitude : 0.075 mm*3

Frequency : 57 to 150 Hz

Acceleration : 9.8 m/s2*3

Continuous Vibration

Frequency : 10 to 57Hz

Amplitude : 0.035 mm*3

Frequency : 57 to 150Hz

Acceleration : 4.9 m/s2 *3


Approx 140g

Performance specifications

Signaling system

Analog RGB

Horizontal synchronization frequency

VGA : 30.67 kHz, SVGA : 37.88 kHz

Vertical synchronization frequency

VGA : 58.48 Hz, SVGA : 60.61 Hz

Output size

VGA : W 640 × H 480 dots, SVGA : W 800 × H 600 dots

Number of output channels


*1 Do not exceed the ambient operating temperature of the VT2 main unit.
*2 When the ambient temperature is higher than 40°C, please use it in the condition of an absolute humidity of 85%RH at 40°C.
*3 Conforms to JIS B 3502, IEC61131-2
Number of sweeps : 10 times respectively in the X, Y, and Z directions (80 minutes)

Other Models