Standard Model, M8 Connector Type (Guarded Cable), 50mm range LR-X50CG

LR-X50CG - Standard  Model, M8 Connector Type (Guarded Cable), 50mm range

  • CE Marking
  • CSA





M8 Connector Type*1

Detecting Distance

25.0 to 50.0 mm

Standard Detectable Deviation

0.5 mm

Display Resolution

0.1 mm

Spot Size

Approx. 0.2 mm × Approx. 1.5 mm
(at a detecting distance of 50 mm)

Response Time

500 μs*2/1 ms/3 ms/10 ms/200 ms Selectable

Light Source


Green laser (505 nm)

Laser Class

Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*3)


Specification v1.1/COM2 (38.4 kbps)


Timer Function

Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot


Control Output

NPN open collector/PNP open collector, N.O./N.C.  *4
30 VDC or less, 50 mA or lower, Residual voltage 2 V or less

External Input

External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable  *4
Short circuit current - NPN: 1 mA or less, PNP: 2 mA or less
Input time 3 ms or more ON, 20 ms or more OFF
(25 ms or more ON, 25 ms or more OFF when External Set is selected only)

Protection Circuit

Protection against reverse power connection, protection against output overcurrent,
protection against output surge, protection against reverse output connection

Power supply

Power voltage

16 to 30 VDC (including 10% ripple (P-P) or less), class 2

Power consumption

During normal operation: 970 mW (38 mA or less at 24 V, 53 mA or less at 16 V) (Excluding Load Current)
ECO ON/ALL: 821 mW (32 mA or less at 24 V, 44 mA or less at 16 V) (Excluding Load Current)

Environmental resistance

Enclosure rating


Ambient light

Incandescent lamp: 16,000 lx or less
Sunlight: 16,000 lx or less

Ambient temperature

-10°C to +50°C (no freezing)

Relative humidity

35 to 85% RH (no condensation)

Vibration resistance

10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes

Shock resistance

1,000 m/s2 (100G) 6 times each for X, Y, and Z axes


Head Case: SUS316L; Head Lens Cover: PSU
Head Packing: FKM (lens cover), EVM (cable)
Cable: PVC; Metal Jacket: SUS304
Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Packing: NBR; Button: POM
Amplifier M8 Connector: SUS303


Instruction manual, laser warning label


Approx. 45 g

*1 Ensure the cable length is 30 m or less for the M8 connector type. Ensure the cable length is 20 m or less when connecting via IO-Link.
*2 If 500 μs is selected, the following limitations apply.
· Only 2-point calibration can be performed.
· The detection range masking is set during calibration. (Manual setting of the masking range is not supported.)
· Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used.
*3 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice No. 56.
*4 The I/O can be selected from the following combinations. Control output × 2, Control output + External input

Other Models