Amplifier Separate Type Photoelectric Sensor

PS-T series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Amplifier Unit, Cable Type, Main Unit, PNP - PS-N11P

Amplifier Unit, Main Unit, PNP PS-T1P

PS-T1P - Amplifier Unit, Main Unit, PNP

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

  • CE Marking

Specifications

Model

PS-T1P

Type

Main unit

Output

PNP

Response time

500 µs

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Output indicator: Red LED, Stable operation indicator: Green LED, Calibration indicator: Yellow LED

Timer function

ON-delay: 40 ms, OFF-delay: 40 ms, Timer OFF (switch-selectable)

External calibration input signal

Non-voltage input (contact, solid state)

Control output

PNP:100 mA max. (30 V max.) Residual voltage: 1 V max.

Stability output

PNP:50 mA max. (30 V max.) Residual voltage: 1 V max. *1

Protection circuit

Reverse polarity protection, Over-current protection, Surge absorber

Multiple connections to Expansion units

Up to 16 expansion units can be connected (a total of 17 units)

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

35 mA or less

Environmental resistance

Ambient temperature

-10 to +55 °C (No freezing)*2

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s2, 3 times in each of the X, Y, and Z directions

Case material

Body/Cover: Polycarbonate

Weight

Approx. 75 g (including 2 m cable)

*1 Stability output is only provided by the PS-T1 (P). Stability output for the PS-T2 (P)/T0 is sent from the PS-T1, FS-T1, FS-M1 or FS-R0.
*2 When several units are connected, the ambient temperature requirement varies depending on the total number of units connected.
When 3 to 10 units: -10 to +50 °C (14 to 122 °F)
When 11 to 16 units: -10 to +45 °C (14 to 113 °F)
When connecting several units, be sure to mount the units to a metallic DIN rail. Make sure that the output current does not exceed 20 mA.

Data Sheet (PDF) Other Models