Specs : High-Speed/Wide Area Static Eliminator - SJ-F300 series

Controller

Model		SJ-F300
Image
Type		Controller
Voltage application method		Variable DC
Applied voltage		±7000 V max.
Ion balance control method		I.C.C. method
Maximum air volume		3.1 m³/min.
Ozone density		0.005 ppm max.
Control input	Input	NPN open-collector or non-voltage contact signal
Control output	Alarm output	NPN open-collector, 100 mA max. (40 V max.)
	Ion level alert output
	Condition alert output
Rating	Power voltage	24 VDC ±10 %
	Current consumption	1.2 A or less (per blower)
Environmental resistance	Ambient temperature	0 to +50 °C
	Relative humidity	35 to 65 % RH (No condensation)
Weight		Approx. 320 g

Model		SJ-F030	SJ-F031	SJ-F035	SJ-F036
Image
Type		Static elimination blower
Voltage application method		Variable DC
Applied voltage		±7000 V max.
Ion balance control method		I.C.C. method
Ion balance		±5 V^*1		±10 V^*1
Static elimination time		Approx 2 sec.^*1		Approx 0.7 sec.^*1
Maximum wind speed		0.8 m/s^*2		3.5 m/s^*2
Maximum air volume		3.1 m³/min.
Ozone density		0.005 ppm max.
Control input	Input	NPN open-collector or non-voltage contact signal
Control output	Alarm output	NPN open-collector, 100 mA max. (40 V max.)
	Ion level alert output
	Condition alert output
Rating	Power voltage	24 VDC ±10 %
	Current consumption	1.2 A or less (per blower)	1.2 A or less	1.2 A or less (per blower)	1.2 A or less
Environmental resistance	Ambient temperature	0 to +50 °C
	Relative humidity	35 to 65 % RH (No condensation)
Weight		Approx. 620 g
^1 Measured at 300 mm from static elimination blower front surface (SJ-F030/F031, Air volume： MIN. SJ-F035/F036, Air volume： MAX) ^2 Measured at 300 mm from static elimination blower front surface